7 Series E38 740iL (M60-2) SAL
Remove sealing caps on covers of ignition coils.
Release nuts.
Remove covers on ignition coils.
Installation:
Check profile seal (1) for damage and correct seating,
replace if necessary.
Disconnect plug connections on ignition coils.
Release screw connections on ignition coils.
Remove ignition coils.
RA Replacing ignition coil (M60, M62)
BMW AG - TIS
14.02.2013 03:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
