7 Series E38 740iL (M60-2) SAL
Unscrew screw.
Remove sensor.
Installation:
Check seal for damage; replace if damaged.
Installation:
Note line routing on injection tube.
Secure line with cable connector.
Read out fault memory of control unit of Digital Motor Electronics
(DME), check stored fault messages, rectify faults, clear fault
memory.
RA Replacing sensor for cylinder recognition (camshaft sensor) (M60, M62)
BMW AG - TIS
14.02.2013 03:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -