7 Series E38 740iL (M60-2) SAL
Protect torque converter from slipping out.
To do this, insert special tool 24 4 131 / 24 4 135 in opening
of transmission housing and clamp torque converter in place.
Unfasten screws.
Pull transmission backwards and lower.
Installation:
Tightening Torque,
refer to Technical Data 24 00 1AZ.
Installation:
Install bolts (1) with narrow shoulder only with washers.
Fit screws (2) with wide collar without any shims.
Installation:
When installing the transmission, special tool 24 2 300 must
be aligned with bore in drive plate.
RA Removing and installing automatic transmission (A5S 560Z)
BMW AG - TIS
14.02.2013 09:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
