7 Series E38 740iL (M60-2) SAL
Brace transmission with special tool 00 2 030 / 24 5 300.
Unclip cable for oxygen sensors on transmission cross-member.
Unfasten screws and remove crossmember.
Installation:
Tightening torque,
refer to Technical Data 24 71 1AZ
Disconnecting propeller shaft from transmission and tying to one
side,
refer to 26 11 000
Unfasten screws.
Installation:
Tightening torque,
refer to Technical Data 24 11 1AZ
RA Replacing radial seal for output flange (A5S 310Z)
BMW AG - TIS
14.02.2013 09:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -