7 Series E38 740iL (M60-2) SAL
24 40 006
Removing and installing or replacing torque
converter
Remove transmission,
refer to 24 00 026
M67 with A5S 560Z, remove transmission,
refer to 24 00 026.
Screw special tool 24 4 000 into the torque converter.
Note:
When torque converter is removed, transmission oil flows out.
Remove torque converter.
Installation:
Caution!
When installing, avoid damaging radial seal and bearing.
Slide torque converter into transmission and rotate, applying
slight pressure, until recesses in torque converter locate
audibly in primary pump.
Drive torque converter firmly home.
RA Removing and installing or replacing torque converter
BMW AG - TIS
14.02.2013 10:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
