7 Series E38 740iL (M60-2) SAL
31 35 000
Removing and installing or replacing front
stabilizer
Remove front axle support,
refer to 31 11 001
Remove left and right push rod.
Installation:
Replace self-locking nut.
Tightening torque,
refer to Technical Data 31 35 5AZ
Unscrew left and right nuts.
Remove stabilizer.
Installation:
Wet retaining bracket with low-surface-tension water.
RA Removing and installing or replacing front stabilizer
BMW AG - TIS
14.02.2013 10:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -