7 Series E38 740iL (M60-2) SAL
35 41 480
Replacing kick-down switch
Check switch,
refer to BMW Diagnosis Program.
Pull off flat male connector (1).
Unfasten nut (2).
Unscrew and remove kick-down switch.
Installation:
Adjust Bowden cable for throttle valve actuation,
refer to 35 41 ...
Vehicle with accelerator sensor:
Remove lower left trim panel from instrument panel.
Attach special tool 35 0 010/012 to stop (3) on pedal block (4 =
brake pedal).
Screw kick-down switch firmly down.
Press accelerator pedal down to floor. Unscrew kickdown switch
until it rests on accelerator pedal.
Fit lock nut (2).
Remove special tool.
RA Replacing kick-down switch
BMW AG - TIS
14.02.2013 12:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -