7 Series E38 740iL (M60-2) SAL
41 61 000
Removing and installing engine hood
Unfasten connector for heated windshield jets and engine
compartment lighting.
Code on aluminum engine hood:
Clinch points on edge of engine hood.
With aluminium parts, refer to:
41 00 ... Basic comments on handling aluminium components
41 00 ... Notes on repairs on aluminium parts
Mark position of hinges on hood lid
(this means no adjustment is required after fitting).
Unscrew bolt (1).
Loosen screw (2).
Remove hood lid.
Installation:
Always replace damaged intermediate plates between hinge
and engine hood on aluminum hood.
RA Removing and installing engine hood
BMW AG - TIS
14.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
