7 Series E38 740iL (M60-2) SAL
51 24 050
Removing and installing/replacing lock
(locking cylinder) for trunk lid set
Remove trunk lid trim,
refer to 51 49 000
Lift out Omega clip (1).
Remove plug connections (2) and (3).
Lift out actuating rod (1).
Unfasten nut and remove lock.
Installation:
Check actuating rod (1) is in correct position.
Lock must be fitted centrally in body aperture.
Installation:
Perform function check with trunk lid open.
RA Removing and installing/replacing lock (locking cylinder) for trunk lid set
BMW AG - TIS
14.02.2013 14:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -