7 Series E38 740iL (M60-2) SAL
Installation:
Place power window in locating bracket (1) and insert loosely
all screws.
Note installation position of nut (2).
Installation:
Tighten screws (1) and (2).
Tightening Torque,
refer to Technical Data 51 33 2AZ.
Installation:
Install door window glass and locate with clamping jaw (1) and
clamping screw (2).
Adjust door window glass,
refer to 51 32 154.
Installation:
Lower door window down to stop.
Tighten screws (1).
Tightening Torque,
refer to Technical Data 51 33 2AZ.
RA Removing and installing power window in front door, left or right (Protection)
BMW AG - TIS
14.02.2013 14:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -