7 Series E38 740iL (M60-2) SAL
Lay butylene tape with a diameter of 6 mm (sourcing reference:
BMW Parts Service) in specified adhesive area.
Heat butylene tape (hot air blower) and firmly press down sound
insulation/protective mat in specified adhesive area.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation/protective mat on left or rig
BMW AG - TIS
14.02.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -