7 Series E38 740iL (M60-2) SAL
65 52 510
Removing and installing on-board monitor
Release screws.
Release upper plastic nuts and remove wooden finisher.
Installation:
Fit outer plastic nuts with knurling (2) facing trim and inner plastic
nuts with hexagon heads (1) facing trim (risk of damage
to passenger airbag).
Remove top left wooden finisher by pulling upwards.
RA Removing and installing on-board monitor
BMW AG - TIS
14.02.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -