7 Series E38 740iL (M62) SAL
If applicable, produce a sample bead before gluing.
Cartridge must be perpendicular to door window.
Shape of glue bead:
(A) 7 mm
(B) 10
-1
mm
(X) 3
+1
mm
Caution!
Apply glue bead promptly and install door window with frame.
Skin forms after 10 minutes.
Carefully position door window first at bottom (A), align laterally (B)
and then install and press into place at top (C).
Secure door window in position with fabric adhesive tape (e.g.
Tesa).
Caution!
Remove dirt from residual glue with Sika remover 208
(sourcing reference: BMW Parts Service) before glue is hard.
Do not press door window out again for this purpose.
Hardened glue can only be removed by machine.
RA Replacing fixed doorwindow in frame, rear left or right (Protection)
BMW AG - TIS
18.02.2013 08:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -