7 Series E38 750iL (M73) SAL
00 00 ...
Front and (if necessary) rear disk brake linings: remove and install, check total thickness. Clean
brake shafts. If necessary, replace linings. Brake disks: Check surface and thickness. Grease
wheel centering mount on alloy wheels
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to
-
Removing and installing front disk brake linings,
-
Removing and installing rear disk brake linings.
Note:
Clean brake shafts.
Replace brake linings if:
-
linings drop below minimum thickness (refer to Technical Data)
Replace brake disks if:
-
disks drop below minimum thickness (refer to Technical Data)
-
Presence of:
-
Scoring
-
Heat cracks
-
Lateral runout
-
Thickness difference
Caution!
After completing tasks, press brake pedal several times so that brake linings rest against brake disks.
RA Front and (if necessary) rear disk brake linings: remove and install, check tota
BMW AG - TIS
20.02.2013 16:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -