7 Series E38 750iL (M73) SAL
11 52 020
Removing and installing or replacing fan
coupling (M73)
Caution!
Left-hand threads.
Lock belt pulley in position using special tool 11 5 050.
Unfasten cap nut with special tool 11 5 040. Remove fan
wheel with fan coupling from water pump.
Installation:
For tightening torque,
refer to Technical Data 11 52 1AZ
Note:
Tightening torque of 40 Nm when using special
tool 11 5 040 is equivalent to 30 Nm on torque wrench
scale.
Unfasten screws and detach fan from fan coupling.
RA Removing and installing or replacing fan coupling (M73)
BMW AG - TIS
20.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -