7 Series E38 750iL (M73) SAL
Unfasten lower screw from heat baffle plate on starter motor.
Remove heat baffle plate.
Unfasten upper nut from exhaust manifold in cylinders 4 to 6,
remove heat baffle plate (1) and unfasten lower nut.
Installation:
Coat thread with -CRC- copper paste.
Replace nuts.
Tightening torque,
refer to Technical Data 11 62 1AZ
Installation:
Fit gaskets (1) with smooth side facing the cylinder head.
RA Removing and installing / replacing both right exhaust manifolds (M73)
BMW AG - TIS
20.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -