7 Series E38 750iL (M73) SAL
Unclip wiring harnesses from left and right Lambda oxygen
sensors on the heat shields.
Unclip and remove wiring harness on transmission bracket.
Unclip and remove wiring harness on transmission bracket.
Remove heat baffle plates from left and right catalytic converters.
Extract complete wiring harness from vehicle underside.
Remove from top side of vehicle:
Disconnect cable tie on cylinder head of cylinder bank 1-6
RA Wiring harness - replacing engine section (M73)
BMW AG - TIS
20.02.2013 19:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -