7 Series E38 750iL (M73) SAL
Remove retaining ring (1) and unhook lever.
Unfasten plug connection (1). Unfasten screws.
Installation:
Note installation position of pedal travel sensor.
Note lever position (1 and 2).
Caution!
Lever (1) is factory-set and must not be released.
If the lever (1) has been released, the entire pedal travel
sensor must be replaced!
Installation:
Install bracket (1) with weld-in nuts.
RA Removing and installing/replacing accelerator sensor (M73)
BMW AG - TIS
20.02.2013 19:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -