7 Series E38 750iL (M73) SAL
Throttle bodies on cylinders 1-6:
Remove suction hose on throttle body.
Disconnect plug-in connection (1). Unscrew bolts.
Installation:
Replace gasket.
Unfasten hose clip (1). Remove hose.
If fitted, remove air relief valve.
Installation:
Always replace fuel hose to tank vent valve and hose clips.
Interrogate fault memory of control unit for Electronic Motor
Performance (EMP), check stored error messages, rectify faults
then clear fault memory.
RA Removing and installing or sealing both throttle bodies (M73)
BMW AG - TIS
20.02.2013 19:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -