bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing _ Replacing The Sensor For The Fuel Level Gauge (right)|Page 885 > < 1 RA Removing And Installing _ Replacing The Sensor For The Fuel Level Gauge (right)

7 Series E38 750iL (M73) SAL

Page 2
background image

Disconnect plug connection.

Disconnect the fuel pipe with special tool 13 3 010 and open the
hose clamp.

Petrol-driven vehicles - inlet line

Diesel-driven vehicles - return line

Unscrew and remove nuts.

Installation:

Tighten nuts crosswise.

Tightening Torque,

refer to Technical Data 16 14 3AZ

Caution!

Expose the connector hose under the lid.

Lift up the lid as far as it will go and swing it up.

RA  Removing and installing / replacing the sensor for the fuel level gauge (right)

BMW AG - TIS

20.02.2013  19:50

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing _ Replacing The Sensor For The Fuel Level Gauge (right)|Page 885 > < 1 RA Removing And Installing _ Replacing The Sensor For The Fuel Level Gauge (right)