7 Series E38 750iL (M73) SAL
Coolant hoses with quick-release couplings
Lift out spring (1).
Disconnect water hose (2).
Release left and right screws (3) on radiator.
Remove both brackets (4).
Installation:
Follow instructions for working on cooling system,
Refer to 17 00 ...
Remove lower coolant hose.
Installation:
Tightening torque 17 00 1AZ
.
Coolant hoses with quick-release couplings
Pull off plug (1).
Lift out spring (2).
Disconnect water hose (3).
Installation:
Slide back spring (2).
Water hose (3) must snap audibly into place.
Unfasten left and right radiator mounts by pressing detent down
with screwdriver.
RA Removing and installing radiator
BMW AG - TIS
20.02.2013 20:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
