7 Series E38 750iL (M73) SAL
18 32 030
Removing and installing one positive or
negative lead on E catalytic converter (M73
from 9/98)
Read out fault memory, clear if necessary.
Switch off ignition.
Unscrew bolt (1).
Unscrew nut (2).
Remove cover (3).
Unclip plugs (1) from retainer.
Disconnect plug connections of positive leads for E catalytic
converter.
Release nut (2) on negative lead (3) on body.
Negative lead:
Release nut (1) on negative lead on E catalytic converter.
Installation:
Replace nut.
Tightening Torque,
refer to Technical Data 18 00 5AZ.
RA Removing and installing one positive or negative lead on E catalytic converter (
BMW AG - TIS
20.02.2013 20:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
