7 Series E38 750iL (M73) SAL
24 61 503
Programming/replacing control unit
Turn off ignition.
Connect MoDiC or DIS Tester.
Turn on ignition.
Select "Programming".
For subsequent procedure, follow MoDiC or DIS instructions.
Note:
Read the section on programming in the "Diagnosis and Coding"
service information bulletin.
Installation location of control unit, refer to DIS Tester.
RA Programming/replacing control unit
BMW AG - TIS
20.02.2013 20:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
