7 Series E38 750iL (M73) SAL
33 10 010
Removing and installing or replacing final
drive
After completing operation, check oil level and, if
necessary, top up final drive oil level,
refer to BMW Service Operating Fluids
Remove exhaust system,
refer to 18 00 020
M67 Remove exhaust system,
refer to 18 00 018.
Remove heat shield.
Remove propeller shaft from final drive,
refer to 26 11 000.
Remove left and right output shafts and tie up,
refer to 33 21 000.
Support rear final drive with special tool 00 2 030 (workshop
hoist) and special tool 33 4 390
Unscrew bolt (1).
Tightening Torque,
refer to Technical Data 33 17 1AZ.
Caution!
Note insertion direction of screw (1).
RA Removing and installing or replacing final drive
BMW AG - TIS
20.02.2013 21:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -