7 Series E38 750iL (M73) SAL
Tighten down collar nut (1) only until marker points are aligned.
Caution!
Do not under any circumstances tighten down collar nut
beyond the marker points, otherwise clamping sleeve will
have to be replaced.
Drive in new retaining plate with special tools 00 5 500 and
33 3 480 or 33 3 490 .
RA Replacing shaft seal for input flange on final drive
BMW AG - TIS
20.02.2013 21:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -