7 Series E38 750iL (M73) SAL
33 52 100
Removing and installing rear left or right
spring strut shock absorber
Remove trim for parcel shelf,
refer to 51 46 000
Remove wheel,
refer to 36 10 300
Remove brake caliper and tie back,
refer to 34 21 320
Lift off cover from shock absorber and unfasten nut. If necessary,
disconnect plug connection for EDC.
Installation:
Replace self-locking nuts. Tightening torque,
refer to Technical Data 33 52 3AZ.
Unfasten nut.
Installation:
Tapered pin and bore free of grease. Replace nut. Tightening
torque,
refer to Technical Data 33 32 8AZ.
Unfasten shock absorber from wheel carrier.
Installation:
Square head (1) on rubber mount points towards head of
screw. Tightening torque,
refer to Technical Data 33 52 1AZ.
RA Removing and installing rear left or right spring strut shock absorber
BMW AG - TIS
20.02.2013 22:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
