7 Series E38 750iL (M73) SAL
Bleeding front-axle brake circuit
Connect bleeder hose and bottle to bleed valve on front right
brake caliper.
Open bleed valve.
Fully depress brake pedal at least 12 times. Brake fluid must
emerge clear and free of bubbles.
Hold down brake pedal in fully depressed position.
Close bleeder valve.
Release brake pedal.
Follow same procedure on front left wheel brake.
Caution!
With fixed caliper, bleed both sides of brake caliper, removing
wheel if necessary.
Switch off bleeder unit and remove from expansion tank.
Check brake fluid level.
Close expansion tank.
Note:
Take care of rubber gasket (1) in lid.
RA Bleeding brake system with ABS/ASC+T
BMW AG - TIS
20.02.2013 22:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
