7 Series E38 750iL (M73) SAL
34 52 545
Removing and installing/replacing
transversal-acceleration sensor DSC3 up to
09/98
Removing driver's seat,
Standard seat, refer to 52 14 000
Comfort seat, refer to 52 17 000
Sports seat, refer to 52 16 000
Removing lower left door pillar trim,
refer to 51 43 150
Caution!
After replacing the acceleration sensor, calibration must be
carried out with DIS (Diagnosis and Information System)
under the "Service functions" menu item.
Lift floor trim panel (1) and fold sidewards.
Release plug connector (2) and pull off connector.
Unfasten screws (3) and remove acceleration sensor.
Installation:
Ensure proper locking of the plug connector.
RA Removing and installing/replacing transversal-acceleration sensor DSC3 up to 09/
BMW AG - TIS
20.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
