7 Series E38 750iL (M73) SAL
37 15 050
Removing and installing/replacing the control
unit (EDC)
Up to 09/97:
Remove actuator drive for tank filler flap.
Unfasten screws.
Unlock connector and remove.
Change the sheet metal nuts (1) if necessary.
Caution!
Once installed, a new control unit must be encoded, refer to
BMW Diagnosis and Information System.
From 09/97:
Installation location, front right, equipment carrier in front of
glovebox, refer also to DIS installed locations.
RA Removing and installing/replacing the control unit (EDC)
BMW AG - TIS
20.02.2013 23:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -