7 Series E38 750iL (M73) SAL
Measure height setting of hood lid (1) relative to front side panels
(2) beside the windshield.
The hood lid (1) should be set 3 mm lower than the front side
panels front (2) beside the windshield.
Tolerance - 1 mm, i.e. the hood lid must lie 4 mm lower than the
side panels in this area.
This arises as a result of adjustment of hood lid next to (B).
Determine height setting in area (B), measure deviation and open
the hood lid.
Secure engine hood.
Caution!
If engine hood is not secured, body and windshield can be
damaged.
Unfasten screws (1) and (2) and fit or remove suitable number of
washers to correct the deviation in height setting.
Tighten loosened screws consecutively on left and right sides.
Close engine hood, check height setting and correct if necessary.
RA Aligning engine hood
BMW AG - TIS
21.02.2013 00:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
