7 Series E38 750iL (M73) SAL
51 12 435
Replacing left or right body molding from
sides of rear bumper
Removing and installing body molding for center section of
rear bumper,
refer to 51 12 432
Version without Park Distance Control (PDC):
First unclip body molding at back (1), then side (2) with special
tool 00 9 321 (folding strut) and pull backwards at an angle to
remove.
Installation:
First insert body molding at front, then clip into place.
Version with Park Distance Control (PDC):
Unclip body molding, unfasten ultrasonic converter and remove.
Unclip and remove chrome finisher from body molding.
RA Replacing left or right body molding from sides of rear bumper
BMW AG - TIS
21.02.2013 01:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
