7 Series E38 750iL (M73) SAL
Aligning windshield:
Turn windshield on assembly stand so that inner side faces
downwards.
Suspend special tool 51 9 002 (suction lifter) from conventional
workshop lifting equipment.
Switch on vacuum pump.
Firmly attach special tool 51 9 002 to outside of windshield in
center in upper third.
Caution!
Follow operating instructions for special tool 51 9 002.
The pointer of the vacuum gauge must be in the green area.
Do not shorten connecting hose between suction hoist and
vacuum pump (minimum length 5 m).
Replacement with original hose only.
Lift windshield with special tool 51 9 002 over body cutout.
First position windshield carefully at top and align sides evenly.
Lower windshield at bottom and in so doing press upwards on left
and right with two special tools 51 3 010 until seal contacts roof
uniformly.
Preload on top of windshield to prevent wind noise:
RA Removing and installing windshield (Protection)
BMW AG - TIS
21.02.2013 01:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
