7 Series E38 750iL (M73) SAL
Installation:
Attach sound insulation/protective mat to a stud bolt for
securing airbag.
Feed in wiring harness and press rubber grommet through
sound insulation/protective mat.
Seal cable penetration with butylene tape (sourcing reference:
BMW Parts Service).
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation/protective
mat (2).
Caution!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
RA Removing and installing/replacing sound insulation/protective mat on left or rig
BMW AG - TIS
21.02.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -