7 Series E38 750iL (M73) SAL
Installation:
Once active seat unit has been fed in,
fold open hydraulic bubbles (1) and (2).
The hydraulic bubbles (1) and (2) must now rest on the surface
without torsion (as shown in illustration).
Turn hydraulic bubbles if necessary.
Connect plug (3) to control module (4).
Check function.
Installation:
Make sure that hydraulic lines (1)
are correctly laid (position, kink-free)
to wiring harness (2) and to air line (3).
Caution!
If a hydraulic line (1) has been kinked,
replace the active seat unit.
RA Removing and installing/replacing drive for active seat, left or right
BMW AG - TIS
21.02.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -