bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

16 RA Removing And Installing _ Replacing The Rear Fan Completely|Page 2649 > < 16 RA Removing And Installing _ Replacing The Rear Fan Completely
Page 2
background image

Unfasten left and right screw.

Unclip finisher (rear oddments tray) over rear (1) and front (2)
apertures.

Remove screws (1 ... 3).

Separate connectors (4 and 5). Unlock receptacle housing (6) and
remove.

Note:

When dismantling the center console, do not damage the
wood.

Lift front of center console (7) forwards and remove.

Unfasten screws and pull wooden finisher on oddments tray
(center) forwards to remove.

Unfasten connector (1) (under wooden finisher) and pull connector
holder (2) of complete wiring harness backwards.

RA  Removing and installing / replacing the rear fan completely

BMW AG - TIS

21.02.2013  05:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

16 RA Removing And Installing _ Replacing The Rear Fan Completely|Page 2649 > < 16 RA Removing And Installing _ Replacing The Rear Fan Completely