7 Series E38 750iL (M73) SAL
64 12 520
Removing and installing / replacing control
unit with heat exchanger (Thermo Top S)
Remove combustion air blower unit
Remove complete heater.
Remove burner insert.
Release screws and remove combustion air blower unit.
Installation:
Observe tightening torque, 64 12 8AZ.
Installation:
Replace sealing rings and ensure they are correctly seated.
Release screws and remove control unit with heat exchanger.
Installation:
Observe tightening torque,
64 12 10AZ.
RA Removing and installing / replacing control unit with heat exchanger (Thermo Top
BMW AG - TIS
21.02.2013 05:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -