bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit > < 3 RA Removing And Installing _ Replacing Expansion Valve (automatic Air Conditioner)|Page 2720
Page 1
background image

64 51 590

Removing and installing / replacing
evaporator (air conditioner control)

Heater / air conditioner removed,

refer to 64 11 205

Remove expansion valve,

refer to 64 51 520

Remove heater core,

refer to 64 11 207

Loosen hose clips on right and left sides and pull off hoses.

Unclip linkages.

Installation:

Move both levers in upper detent and clip in linkages.

Unfasten all screws and clips from lower section of housing,
remove lower section of housing and lever out evaporator.

RA  Removing and installing / replacing evaporator (air conditioner control)

BMW AG - TIS

21.02.2013  05:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit > < 3 RA Removing And Installing _ Replacing Expansion Valve (automatic Air Conditioner)|Page 2720