7 Series E38 750iL (M73) SAL
66 31 005
Removing and installing/replacing ACC
sensor
Necessary preliminary tasks:
•
Remove complete front bumper.
Release screws (1) and remove air duct.
Press electric leads out of mountings.
Release screws (1) and disconnect plug connection (2) under
ACC sensor.
Note:
Following work steps must be carried out:
During removal and installation:
•
Initialize ACC sensor; to do so, work through test module
"ACC initialization" (service functions).
•
Carry out ACC sensor adjustment with MoDiC or DIS.
Additionally during replacement:
•
Code/program ACC sensor.
RA Removing and installing/replacing ACC sensor
BMW AG - TIS
21.02.2013 06:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
