7 Series E38 L7 (M73) SAL
11 13 020
Removing and installing / replacing lower
section of oil pan (M73)
Unscrew and remove splash guard.
Open cover on main flow oil filter, engine oil returns to oil sump.
Open oil drain plug. Drain engine oil.
Unfasten plug connection on oil level switch (1).
Unfasten screws and remove lower section of oil pan (1). Remove
level switch.
Installation:
Clean sealing faces and replace gasket.
Insert and tighten down new screws (threads coated with
plastic).
Tightening torque,
refer to Technical Data 11 13 2AZ.
RA Removing and installing / replacing lower section of oil pan (M73)
BMW AG - TIS
21.02.2013 22:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -