7 Series E38 L7 (M73) SAL
11 14 192
Removing and installing / sealing rear right
end cover on cylinder head (cylinder bank 1-
6)(M73)
Remove right cylinder head cover,
refer to 11 12 004
Unfasten rear cable tie on cylinder head.
Unfasten screws then lift off end cover with bracket (1) for cable
tie (illustrated here on removed engine).
Installation:
Clean sealing faces and replace gasket (1).
RA Removing and installing / sealing rear right end cover on cylinder head (cylinde
BMW AG - TIS
21.02.2013 22:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -