7 Series E38 L7 (M73) SAL
Rotate engine at central bolt in direction of rotation until the first
cylinder is in TDC firing position.
Note:
When the first cylinder is in TDC firing position, the recess on
the flange of the camshaft (1) is flush with the bolt
connection of the oil baffle (2).
Remove dust cover from locating bore.
Secure crankshaft with special tool 11 2 300 in TDC firing
position.
Caution!
Remove special tool prior to operating engine.
Secure both camshafts with special tool 11 3 190 in TDC firing
position.
Note:
Crankshaft and camshaft remain secured until completion of
conversion work.
Press off retaining cap (1) from chain tensioner with screwdriver.
RA Removing and installing/sealing or replacing timing case at top (M73)
BMW AG - TIS
21.02.2013 22:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -