7 Series E38 L7 (M73) SAL
If necessary, remove vent pipe (1).
Installation:
Installation position of vent pipe (1) in manifold (2).
Installation:
Clip rubber mount (1) of vent pipe (2) in manifold on rotary
shaft.
Installation:
Lug (1) on vent pipe must locate in bore (2) of manifold.
RA Removing and installing / replacing intake air manifold for cylinders 1-6 (M73)
BMW AG - TIS
21.02.2013 22:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -