Removing and Replacing Non-return Valve (Cylinder Bank 1-6) for 7 Series E38 L7 (M73) Engine
11 72 052
Removing and installing / replacing non-
return valve (cylinder bank 1-6) (M73)
Compress retainer (2) and push off connector (1).
Open clips (1).
Unfasten hose clip (2) from inlet hose for air pump. Remove
hose.
Disconnect plug connection (3).
Unfasten hose clip (4).
Remove complete top right section of intake filter housing.
Remove fan coupling with fan wheel,
refer to 11 52 020
Unclip and remove oil drip tray.
RA Removing and installing / replacing non-return valve (cylinder bank 1-6) (M73)
BMW AG - TIS
21.02.2013 23:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -