7 Series E38 L7 (M73) SAL
11 72 194
Removing and installing / sealing and
replacing pipe for secondary air induction
(cylinder bank 7-12) (M73)
Removing non-return valve for cylinder bank 7 to 12,
refer to 11 72 054
Removing left distributor cap (cylinder bank 7 to 12),
refer to 12 11 096
Remove spark plug connector from cylinder bank 7 to 12.
Unfasten nuts and remove ignition wiring harness (1).
Unfasten screw connection on heat baffle plate on exhaust
manifold for cylinders 7 to 9 (top nuts on exhaust manifold).
Unfasten flanges (1 and 2).
RA Removing and installing / sealing and replacing pipe for secondary air induction
BMW AG - TIS
21.02.2013 23:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
