7 Series E38 L7 (M73) SAL
Mounting block, unfasten screws.
Installation:
Note length of screws! Long screws (1), short screws (2).
Installation:
Clean sealing face and replace gasket.
Installation:
Replace sealing rings on oil line flanges.
To facilitate assembly, always coat seals on oil lines with anti-
friction agent. Carefully fit oil lines.
Note torsion protection (1) on oil lines in bracket.
RA Removing and installing / replacing mounting block for alternator (M73)
BMW AG - TIS
21.02.2013 23:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -