7 Series E38 L7 (M73) SAL
34 33 051
Removing and installing / replacing non-
return valve for brake booster
Important!
Note "General Information",
refer to 34 00 ...
Before starting work, actuate the brake pedal several times
to reduce the vacuum in the brake booster, making it easier
to pull off the vacuum hose.
Open hose clips (1 - 2) and pull off vacuum hoses.
Installation:
Replace hose clips.
Pull off the rubber seal (1).
Unfasten catches (4 pieces) and pull off upper section of
separating wall seal upward.
Installation:
Ensure proper locking of retaining hooks.
RA Removing and installing / replacing non-return valve for brake booster
BMW AG - TIS
22.02.2013 02:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
