7 Series E38 L7 (M73) SAL
Expose connection points on reinforcement plate of transmission
tunnel.
Drill out welding spots and remove reinforcement plate.
Cut along seam on partition wall on carrier plate.
Note:
To illustrate more clearly, shown with wheel arch removed.
Drill out welding spots on connection point between carrier
support / A-pillar.
Expose welding points in connection point between wheel arch /
A-pillar in carrier plate and drill out.
RA Replacing front section of engine support to left wheel arch
BMW AG - TIS
22.02.2013 04:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -