7 Series E38 L7 (M73) SAL
Place spot welds along gutter in such a way that a continuous
seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Cringe edge of wheel housing.
Straighten welded surfaces when necessary. Tin out and grind
down water drain/side panel joint.
RA Replacing left rear side panel (partial replacement)
BMW AG - TIS
22.02.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
