7 Series E38 L7 (M73) SAL
51 11 000
Removing and installing complete front
bumper
Note:
Open hood.
Unfasten left/ right screws and lift out wheel arch finishers (1) from
side.
Unfasten screws from impact absorber.
Installation:
Tightening torque,
refer to Technical Data 51 11 2AZ
Press detent lugs upwards and pull bumper forwards slightly.
RA Removing and installing complete front bumper
BMW AG - TIS
22.02.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -