7 Series E38 L7 (M73) SAL
51 13 400
Removing and installing or replacing rear
finisher
Unscrew and remove licence plate.
Open trunk lid.
Lift out licence plate lights (1) and remove connector. Lift out clips
(2).
Remove gasket.
Installation:
The recesses in the gasket and trunk lid must be aligned with
one another.
RA Removing and installing or replacing rear finisher
BMW AG - TIS
22.02.2013 04:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
